 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
OIL PAN REPLACEMENT
This task covers:
a. Removal b. Installation
References:
Tools and Special Equipment:
TM 5-2420-224-20
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N26
Equipment Condition:
Materials/Parts:
Reference
Condition Description
Packing
Engine Removed
Seal
Accelerator Pedal
TM 5-2420-224-20
Packing
and Linkage Removed
(Engine Linkage Only)
Kit, Gasket
Appendix B, Item 2
Adhesive
REMOVAL
1.
REMOVE gage ROD (1), cap (2), and spacer (3).
2.
REMOVE nut (4), bolt (5), washer (6), clamp (7), guide TUBE (8), and packing (9). DISCARD
PACKING.
REMOVE bolt (10) and BRACKET (11).
3.
REMOVE 4 nuts (12), 2 screws (13), 16 screws (14), 2 long screws (15), 2 washers (16), oil PAN
4.
(17), and 4 gaskets (18, 19, 20, and 21). DISCARD GASKETS.
REMOVE PLUG (22) and seal (23). DISCARD SEAL.
5.
REMOVE PLUG (24) and packing (25). DISCARD PACKING.
6.
7.
REMOVE four STUDS (26) from cylinder block.
INSTALLATION
INSTALL four STUDS (26) in cylinder block.
1.
2.
INSTALL PLUG (24) and new packing (25).
INSTALL PLUG (22) and new seal (23).
3.
A d h e s i v e causes immediate bonding on contact with eyes, skin, or clothing and
also gives off harmful vapors. Wear protective goggles and use in
well-ventilated area. If adhesive gets in eyes, try to keep eyes open; flush eyes
w i t h water for 15 minutes and get immediate medical attention.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals