 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
CRANKSHAFT, MAIN BEARINGS, AND REAR SEALS REPLACEMENT
(CONT)
INSTALL flanged bearing HALF (7) on center
5.
bearing cap (8) and six unflanged bearing
HALVES (9) on remaining bearing caps (10).
I N S T A L L six bearing HALVES (11) on
6.
connecting rods (12) and six bearing HALVES
(13) on six lower connecting rods (14).
7.
CHECK LENGTH of 14 bolts (15). MAXIMUM
ALLOWABLE length is 4.84 in. (123 mm).
REPLACE BOLT(S) that exceed allowable
length.
NOTE
Bearing caps are numbered and
m u s t be installed in order with
numbers toward front.
INSTALL CRANKSHAFT (16), 7 bearing caps
8.
(8 and 10), and 14 bolts (15). TIGHTEN
BOLTS to 37-44 lb-ft (50-60 N.m). Starling
from center cap and working toward ends
a l t e r n a t e l y , TIGHTEN a SECOND TIME
90-110 degrees.
13-21
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals