 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-34
CRANE GEAR BEARING REPLACEMENT (CONT)
4.
WHEN desired BACKLASH has been SET,
TIGHTEN 18 CAPSCREWS (3) to 500 lb-ft
(678 N.m).
REPEAT STEP 3. If BACKLASH is OUT of
5.
TOLERANCE, LOOSEN 18 CAPSCREWS (3).
REPEAT STEPS 3 and 4 until backlash is
correct.
6.
C O N N E C T lubrication LINE (5) to gear
bearing (1).
CAUTION
Carefully feed hydraulic hoses
through opening to prevent
d a m a g e to hoses.
7.
APPLY COAT of SEALING COMPOUND to
1 8 new CAPSCREWS (6) and INSTALL
CRANE assembly (7), 18 capscrews (6), and
18 washers (8). TIGHTEN CAPSCREWS to
500 Ib-ft (678 N.m).
12-23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals