HAZARD WARNING LIGHT WIRING HARNESS REPLACEMENT

TM 5-2420-224-34

HAZARD WARNING LIGHT WIRING HARNESS REPLACEMENT

a. Removal b. Installation

This task covers:

Tools and Special Equipment:

General Safety Instructions:

Shop Equipment, SC 4910-95-CL-A31

TooI Kit, SC 5180-90-CL-N26

WARNING

R e m o v e or disconnect batteries

Materials/Parts:

and turn vehicle MASTER

Strap, Tiedown

d i s c o n n e c t switch OFF prior to

performing maintenance in

References:

immediate battery area or

working on electrical system.

TM 5-2420-224-20

Such disconnections prevent

e l e c t r i c a l shock to personnel or

Equipment Condition:

equipment.

Reference

Condition Description

TM 5-2420-224-20

Air Cleaner Ducts

Removed

NOTE

Wiring harnesses and leads are secured to vehicle with tiedown straps, loop clamps,

and screw terminals. Discard tiedown strap(s).

Only remove hardware securing wiring harness or lead to be removed.

REMOVE hazard warning light wiring HARNESS using illustration and legend as a guide.

NOTE

Make sure hazard warning light wiring harness is secure and all hardware is tight.

Install new tiedown strap(s).

INSTALL hazard warning Iight wiring HARNESS using illustration and legend as a guide.

NOTE

Follow-on Maintenance:

Install air cleaner ducts (TM 5-2420-224-20).