Quantcast LEFT FRONT AUXILIARY HEADLIGHT LOW BEAM WILL NOT LIGHT. cont'd

 

Click here to make tpub.com your Home Page

Page Title: LEFT FRONT AUXILIARY HEADLIGHT LOW BEAM WILL NOT LIGHT. cont'd
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
LEFT FRONT AUXILIARY HEADLIGHT LOW BEAM WILL NOT LIGHT.
Up
TM-5-2420-224-20-1 Tractor Wheeled 4x4 DED Small Emplacement Excavator (SEE) and High Mobility Material Handler (HMMH) Manual
Next
LEFT FRONT AUXILIARY HEADLIGHT HIGH BEAM WILL NOT LIGHT.
TM 5-2420-224-20-1
Table 3-5. Troubleshooting (Cont)
Malfunction
Test or Inspection
Corrective Action
ELECTRICAL SYSTEM (CONT)
Step 1. Check for +24 VDC between wire 42LL (1) and ground at auxiliary headlight
connector (2).
If +24 VDC is not present, go to step 4.
If +24 VDC is present, go to step 2.
Step 2. Remove two bolts (3), lamp guard (4), mount (5), and lamp (6).
Step 3. Check for +24 VDC between wire 42LL (1) and ground at socket (7).
If +24 VDC is present, replace lamp.
If +24 VDC is not present, repair wiring 42LL between socket
and auxiliary headlight connector.
Step 4. Check for +24 VDC between wire 42LL (1) and ground at auxiliary light
control switch (8).
If +24 VDC is present, repair wiring 42LL between auxiliary
light control switch and auxiliary headlight connector.
If +24 VDC is not present, go to step 5.
Step 5. Check for +24 VDC between wire 41LL (9) and ground at auxiliary light
control switch (8).
If +24 VDC is present, replace auxliiary light control switch
(page 4-146).
If +24 VDC is not present, go to step 6.
Step 6. Disconnect connector G (10) and check for +24 VDC between wire 41LL (9)
and ground.
If +24 VDC is present, repair wiring 41LL between connector G
and auxiliary light control switch.
If +24 VDC is not present, reconnect connector G and go to
step 7.
Step 7. Check for +24 VDC between wire 41LL (9) and ground at fuse box 2 (11).
If +24 VDC is not present, replace fuse.
If +24 VDC is present, repair wiring 41LL between fuse box 2
and connector G.
3-102

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.