Table 3-5. Troubleshooting
Test or Inspection
Before starting engine, make sure all personnel are clear of engine. Failure to
do so could result in injury to personnel.
1. ENGINE WILL NOT CRANK.
Refer to wiring diagram (page 3-77) for all wiring repair steps.
Step 1. Check for loose electrical connections on battery and starter.
If electrical connections are loose, tighten connections.
If electrical connections are tight, go to step 2.
Step 2. Check condition of fuse No. 3 (1), fuse box 1 (2).
If fuse No. 3 is blown, replace fuse.
If fuse No. 3 is good, go to step 3.