 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-224-20-1
ON-CONDITION NOTES (CONTINUED):
Note 21
ENGINE OIL DRAIN (SEE/HMMH)
WARNING
Hot oil causes burns and serious injury.
Use care when checking or draining hot
oil.
NOTE
Drain oil when notified by Army Oil
Analysis Program (AOAP) laboratory.
Unless notified by AOAP, engine oil
must be changed quarterly.
A
Remove
inside
engine
hood
(page
4-389).
B
Run engine until warm; stop engine.
Place suitable container under engine.
Remove drain plug (1) and drain oil.
Install drain plug (1).
C
Remove and discard oil filter element (2)
(page 4-7). Clean filter base. Apply thin
coating of clean oil to gasket on base of
new filter element (2) and install on
engine (page 4-7).
D
Remove filler cap (3) and fill engine with
OE/HDO or OEA until dipstick (4)
indicates
maximum
(MAX)
level.
Remove filler plug (5) and fill filter
bowl/canister with OE/HDO (Appendix C,
Items 22, 23, 24, or 25) or OEA
(Appendix C, Item 30).
E
Start engine and check for oil leaks.
F
Check oil level after engine has been
shut down.
Change 2
2-14.23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals