FRONT AND REAR AXLE WHEEL HUB DRIVES (SEE/HMMH)

TM 5-2420-224-20-1

ANNUAL NOTES (CONTINUED):

Note 16

FRONT AND REAR AXLE WHEEL HUB DRIVES

(SEE/HMMH)

Place suitable container under drain plug (1) and

drain oil. Install drain plug (1) and remove fill plug

(2) and check plug (3). Fill axle with GO-80/90

(Appendix C, Item 27) or GO-75 (Appendix C, Item

26) through fill plug (2). Oil level should be level

with bottom of the inspection hole (3). Install fill

plug (2) and check plug (3).

AXLE-WHEEL HUB DRIVE (DISC BRAKE)

DRAIN PLUG (BOTTOM)

FILL PLUG (FORWARD)

CHECK PLUG (REAR)

Note 17

CLUTCH RELEASE SHAFT (SEE/HMMH)

CAUTION

Damage can occur to clutch assembly if over-lubricated.

Apply two shots of GAA (Appendix C, Item 19) from standard-held grease gun to fitting (1) on clutch housing

(2).

Change 2

2-14.19