QUARTERLY NOTES (CONTINUED):
AXLE DRIVE AND WHEEL HUB REDUCTION OF
FRONT AND REAR AXLE (SEE/HMMH)
Place vehicle in two-wheel drive before
checking oil level. Oil is under pressure
when in four-wheel drive position and
could cause serious injury to eyes when
removing inspection plug.
Remove inspection plug (1) in each axle and
check oil level. Oil should be level with the bottom
of the oil inspection hole.
(Appendix C, Item 27) or GO-75 (Appendix C, Item
26) as required.
AXLE-WHEEL HUB DRIVE (DISC BRAKE)
CHECK PLUG (REAR)
FILL PLUG (FORWARD)
DRAIN PLUG (BOTTOM)
Lubricate two fittings on rotator bearing every 300
hours with GAA (Appendix C, Item 19).