Table 2-1. Preventive Maintenance Checks and Services (Cont)
NOTE: Within designated interval, these checks are to be performed in the order listed.
Item to be Inspected:
Procedure: Check for and have repaired, filled, or adjusted as needed.
FRAME AND CROSSMEMBERS (CONT)
b. Inspect crossmembers for weld breaks.
a. Check steering gear for leaks and loose mounting bolts and components. Notify
direct support maintenance for any repairs.
L IN K
S T E E R IN G
b. Check tie rod and drag link for movement by attempting to move by hand. Visually
check ball joint ends for worn or damaged dust seals. If movement or damage is
present, refer to direct support maintenance.