Disconnecting Hydraulic Tools from Hydraulic Hose Reel .

TM 5-2420-224-10

Disconnecting Hydraulic Tools from Hydraulic Hose Reel .

WARNING

Make sure hydraulic power source is off before removing tool hoses from hose reel

hoses. Failure to do so could result in personal injury from accidental activation of tool.

NOTE

The following procedures apply to all hydraulic tools.

(1) Lay tool on tarp or clean, dry surface.

(2) Unlock quick-disconnect coupler by twisting until slot is alined with alinement pin. Pull back on coupler half

to release quick disconnect.

(3) Wipe quick disconnects and tools clean.

(4) Return hoses (1) to hose reel.

(5) Place hydraulic tool back in proper storage place.

u. Hydraulic Tool Operation.

(1) Installing Pavement Breaker Spade/Bits (SEE).

NOTE

Use your foot, not your hand, to engage latch.

2-122