 |
|||
|
|
|||
|
Page Title:
Table 2-1. Preventive Maintenance Checks and Services for SEE/HMMH (Cont) |
|
||
| ||||||||||
|
|
 TM 5-2420-224-10
Table 2-1. Preventive Maintenance Checks and Services for SEE/HMMH
Item
Interval
Crewmember
Not Fully Mission
Location
No.
Procedure
Capable If:
Item to
Check/
Service
NOTE
8
Before
Crane
Assembly
Place crane in travel position (refer to page
(HMMH)
Continued
e. Inspect crane mast, boom, inner boom,
e. Broken welds or damage
outer boom, extension crane hook
that would impair operation.
assembly, rear outrigger, and front outrigger
for physical damage, and broken welds.
f. Verify all locking devices, safety pins,
f. Locking devices, safety
and latches are present and implements are
pins are missing or damaged
securely locked in travel position.
and latches are not locked.
NOTE
9
Before
Right Side
Exterior
If
leakage
is
detected,
further
investigation is needed to determine the
location and cause of the leak.
a. Visually check underneath vehicle for
a. Any brake fluid leak;
evidence of fluid leakage.
class III leak of oil, fuel or
coolant.
b. Visually check right side of vehicle for
b. Any damage that would
obvious damage.
prevent operation.
WARNING
10
Before
Right Side
Operating a vehicle with a tire in an
Tires
underinflated condition or with a
questionable defect may lead to
premature tire failure and may cause
equipment damage and injury or
death to personnel.
Visually check tires for presence and
Any right side tire is de-
underinflation.
flated.
Change 1
2-31
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals