|
| |
TM 5-2420-222-34
15-5.
LOADER LIFT ARMS MAINTENANCE (Con’t).
3.
While assistant supports boom cylinder (6), drive grooved pin (5) out of lift arms (3) and boom cylinder with brass
drift and ball-peen hammer.
4.
Lower boom cylinder (6) to rest on frame assembly front support.
5.
Remove two screws (10), locknuts (8), and light brackets (9) from pins (2) and side frames (1 and 7). Discard
locknuts.
6.
Drive two pins (2) out of lift arms (3) and side frames (1 and 7) with brass drift and ball-peen hammer.
7.
Using lifting device, remove lift arms (3) clear of side frames (1 and 7) and set on wood blocks. Remove lifting
device from lift arms.
TA701651
15-23
|
