|
| |
TM 5-2420-222-34
14-23.
BACKHOE STABILIZER CYLINDER ASSEMBLIES REPAIR.
This Task Covers:
a.
Disassembly
c.
Repair
b.
Cleaning and Inspection
d.
Assembly
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Backhoe stabilizer cylinder assembly removed (see •
Abrasive cloth (Item 6, Appendix B)
TM 5-2420-222-20).
•
Hydraulic fluid (Item 15, Appendix B)
•
Rags (Item 28, Appendix B)
Tools/Test Equipment:
•
Dry cleaning solvent (Item 31, Appendix B)
•
General mechanic's tool kit
•
One repair kit
•
Field automotive shop set
•
One self-locking nut
Personnel Required: Two
General Safety Instructions:
•
Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
•
Compressed air used for cleaning purposes should never exceed 30 psi (207 kPa).
NOTE
Preform this procedure to repair both backhoe stabilizer cylinder assemblies. One
backhoe stabilizer cylinder assembly is shown.
a.
DISASSEMBLY
1.
Place actuating cylinder 91) in vise with caps.
TA701625
14-111
|
