|
| |
TM 5-2420-222-34
14-5.
HYDRAULIC PUMP DRIVE SHAFT AND COUPLER MAINTENANCE (SERIAL NUMBERS 319995-342573).
This Task Covers:
a.
Removal
c.
Repair
b.
Cleaning and Inspection
d.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Hood removed (see TM 5-2420-222-20).
•
Thread sealing compound (Item 12, Appendix B)
•
Air cleaner removed (see TM 5-2420-222-20).
•
Detergent (Item 13, Appendix B)
•
Radiator removed (see TM 5-2420-222-20).
•
Rags (Item 28, Appendix B)
•
Dry cleaning solvent (Item 31, Appendix B)
Tools/Test Equipment:
•
General mechanic's tool kit
General Safety Instructions:
•
Field automotive shop set
•
Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a.
REMOVAL
NOTE
It may be necessary to use pinch bar to rotate drive shaft to gain access to four
capscrews.
1.
Remove four capscrews 93) from drive shaft (6).
TA701563
14-29
|
