|
| |
TM 5-2420-222-34
14-2.
ACCUMULATOR ASSEMBLY MAINTENANCE (Con’t).
12.
Install plug (3) and new preformed packing (4) in end cap (5).
f.
INSTALLATION
1.
Position bracket (15) in place on right canopy special bracket (16) and secure with four capscrews (13) and new
lockwashers (14).
2.
Position clamp (7) in place on hydraulic cylinder (8).
3.
Position hydraulic cylinder (8) and clamp (7) in place on bracket (15). Install capscrew (9), new lockwasher (2),
and nut (1) in clamp and bracket.
4.
Install two capscrews (12) and new lockwashers (11) in bracket (15) and cap (10).
FOLLOW-ON TASKS:
•
Install hydraulic accumulator oil line tee (see TM 5-2420-222-20)
•
Connect steering pressure hose-to-tee (see TM 5-2420-222-20).
•
Connect pump pressure line-to-tee (see TM 5-2420-222-20).
•
Charge hydraulic accumulator (see TM 5-2420-222-20).
TA701548
14-12
|
