|
| |
TM 5-2420-222-34
13-5.
COWL SUPPORT MAINTENANCE (Con’t).
7.
Remove two capscrews (30), lockwashers (31), and angle bracket (33) from cowl support (7) and reverser housing
(25). Discard lockwashers.
8.
Remove cowl support (7) from steering column (16) and reverser housing (25).
b.
DISASSEMBLY
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash point is 100°F-138°F (380C-59°C). If
you become dizzy while using cleaning solvent, Immediately get fresh air and
medical help. If solvent contacts eyes, Immediately wash your eyes and get
medical aid.
CAUTION
Do not remove cowl barriers unless damaged. Removal may damage barriers.
NOTE
Removal is the same for all cowl barriers. Repeat steps 1 and 2 for others as required.
1.
Lift up corner of cowl barrier (29, 34, or 35) and dissolve adhesive with dry cleaning solvent and rags. Continue to wet
with dry cleaning solvent until cowl barrier Is completely off cowl support (7).
2.
Clean adhesive off cowl support (7) with dry cleaning solvent and clean rags. Rinse with water and dry thoroughly.
TA701527
13-28
|
