|
| |
TM 5-2420-222-34
13-4.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY REAR MOUNTS MAINTENANCE (Con’t).
2.
With the aid of an assistant and lifting device, position canopy or ROPS (7) in place on two canopy rear supports (9)
and two special brackets (10) with mounting holes alined.
3.
Install four capscrews (23), eight washers (24), four washers (25), lower rear mounts (27), washers (28), new
lockwashers (29), and nuts (31) in canopy or ROPS (7) and two canopy rear supports (9).
4.
With the aid of an assistant, install eight capscrews (22), sleeve spacers (36), washers (37), spacers (35 and 34), new
lockwashers (33), and nuts (32) in canopy or ROPS (7), two canopy rear supports (9), and rear axle housings (30).
5.
Position rear crossmember (21) in place on canopy or ROPS (7) and secure with four capscrews (19), new
lockwashers (20), and nuts (38).
TA701522
13-22
|
