|
| |
TM 5-2420-222-34
13-4.
ROLL-OVER PROTECTIVE STRUCTURE OR CANOPY REAR MOUNTS MAINTENANCE (Con’t).
7.
Remove two capscrews (19), lockwashers (20), nuts (38), and rear crossmember (21) from canopy or ROPS (7).
Discard lockwashers.
8.
Remove eight capscrews (22), washers (37), sleeve spacers (36),16 spacers (35), eight spacers (34), lockwashers
(33), and nuts (32) from canopy or ROPS (7), two canopy rear supports (9), and rear axle housings (30). Discard
lockwashers.
9.
Remove four capscrews (23), eight washers (24), four washers (25), upper rear mounts (26), lower rear mounts (27),
washers (28), lockwashers (29), and nuts (31) from canopy or ROPS (7) and canopy rear supports (9). Discard
lockwashers.
10. With the aid of an assistant and lifting device, remove canopy or ROPS (7).
11. Remove two canopy rear supports (9).
TA701517
13-16
|
