|
| |
TM5-2420-222-34
13-2.
CANOPY PROTECTIVE ROOF MAINTENANCE (SERIAL NUMBERS 235786-235999) (Con’t).
1.
Using lifting device, support canopy panel (1).
2.
Remove eight nuts (7), washers (6), and bolts (5) from canopy (4) and canopy panel (1).
3.
Remove 12 drive screws (2) from canopy panel (1) and canopy (4).
4.
Using lifting device, remove canopy panel (1) from canopy (4) and set on wood blocks.
b.
DISASSEMBLY
Remove two channels (3) from front and rear edge of canopy panel (1).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame
or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-59C). If you
become dizzy while using cleaning solvent, immediately get fresh air and medical
help. If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean canopy panel and all other metal parts with dry cleaning solvent and rags. Dry thoroughly with clean, dry
rags.
2.
Clean channels with rag dampened in water and detergent solution. Rinse with clean water and dry thoroughly.
3.
Inspect canopy panel and all other metal parts for cracks, breaks, and abnormal bends.
4.
Inspect channels for cracks, tears, or crumbling.
d.
ASSEMBLY
Position two channels (3) in place on front and rear edge of canopy panel (1).
13-8
|
