|
| |
TM5-2420-222-34
12-1.
FRAME ASSEMBLY FRONT SUPPORT MAINTENANCE (Con’t).
e.
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Lifting device Is required when
parts weigh over 50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two
person lift, and over 150 lb (68 kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may
cause serious injury or death to personnel.
NOTE
If frame assembly front support was removed only to access engine for removal,
skip steps 1 through 11.
1.
Using a lifting device and the aid of an assistant, lift frame assembly front support (6) and position on front axle
(30) with pin holes alined.
2.
Drive pivot pin (47) in pin holes of frame assembly front support (6) and front axle (30). If removed, install grease
fitting (43) in pivot pin.
3.
If removed, install grease fitting (48) in front axle (30).
4.
Install pivot pin (44) in busting (55) and front axle (30).
TA701498
12-14
|
