|
| |
TM 5-2420-222-34
11-1.
STEERING COLUMN AND VALVE SUPPORT MAINTENANCE (Con’t).
a.
REMOVAL
NOTE
•
Use a drain pan to catch fluid when disconnecting lines and hoses. Clean up all
spills.
•
Tag lines and hoses to ensure proper Installation.
1.
Disconnect line (2) from elbow (1).
2.
Disconnect hose (8) from elbow (7).
3.
Disconnect left-hand steering line (4) from elbow (3).
4.
Disconnect right-hand steering line (5) from elbow (6).
NOTE
Some loader backhoes do not have rear bracket and clamp. If parts are not
present, skip steps 5 and 6.
5.
Remove two capscrews (23), washers (24), retaining strap (22), lockwashers (11), and nuts (10) from steering
column housing (21) and hanger (12). Discard lockwashers.
6.
Remove two nuts (16), lockwashers (17), washers (18), and U-bolt (20) from steering column housing (21) and
angle bracket (19). Discard lockwashers.
7.
Remove four capscrews (25) and lockwashers (26) from steering valve support (27) and reverser housing (28).
Discard lockwashers.
8.
Remove steering column housing (21) with assembled parts from reverser housing (28) and angle bracket (19).
9.
Remove two capscrews (15), angle bracket (19), lockwashers (13), and nuts (14) from cowl support (9). Discard
lockwashers.
TA701473
11-2
|
