|
| |
TM 5-2420-222-34
9-3.
REAR AXLE HOUSING, SHAFTS, SEALS, BEARINGS, AND PLANETARY PINION CARRIER MAINTENANCE
(Con’t).
3.
Support transmission (9) with wood blocks.
4.
Drain transmission (see TM 5-2420-222-20).
NOTE
Steps 5 through 10 apply only to right side rear axle housing.
5.
Using lifting device, support rear axle housing (1).
6.
Place drain pan under rear axle housing (1).
7.
Remove eight screws (10) from rear axle housing (1) and transmission (9).
8.
Using lifting device, remove rear axle housing (1) with assembled parts and gasket (6) from transmission (9) and final
drive shaft (7) and set on wood blocks. Discard gasket.
9.
Remove final drive shaft (7) and assembled brake disk (8) from drive shaft hub and transmission (9).
10. Using center punch and ball-peen hammer, match-mark brake disk (8) and final drive shaft (7). Remove brake disk
from final drive shaft.
9-12
|
