|
| |
TM 5-2420-222-34
8-21.
REVERSER OIL LINES REPLACEMENT (Con’t).
b.
INSTALLATION
1.
If removed, install two studs (17).
2.
Install bracket (16) with two lockplates (15) and nuts (14).
3.
Install two new preformed packings (18) and sleeve nuts (19) in transmission oil pump (23).
4.
Install transmission oil pump inlet tube (22) and outlet tube (21) in transmission oil pump inlet and outlet with four
new preformed packings (20).
5.
Install rear clutch lubrication tube (12) in retaining plate (10) with two new preformed packings (11).
6.
Install filter tube (6) in retaining plate (10) with two new preformed packings (7).
7.
Install transmission lubrication tube (8) in retaining plate (10) and transmission with two new preformed packings
(9).
8.
Install reverse clutch pressure tube (13) in retaining plate (10) and reverse clutch with two new preformed
packings (5).
9.
Install lubrication tube (2) in front clutch with new preformed packing (1).
10.
Install front clutch pressure tube (4) on lubrication tube (2) using new preformed packings (1 and 3).
11.
Install other end of front clutch pressure tube (4) in retaining plate (10) with new preformed packing (3).
FOLLOW-ON TASKS:
•
Install reverser housing (see paragraph 8-16).
8-103
|
