|
| |
TM 5-2420-222-34
8-19.
TRANSMISSION OIL PUMP MAINTENANCE (Con’t).
NOTE
Gears must be replaced as a matched set.
3.
Install powershaft drive shaft (1), gear (7), and gear (5) in transmission oil pump (3).
e.
INSTALLATION
Position transmission oil pump (3) on reverser brake housing (6) and install five screws (8) and screw (2). Torque
screws to 23 Ib.-ft. (31 N•m).
FOLLOW-ON TASKS:
•
Install reverser oil lines (see paragraph 8-21).
•
Install clutch disk carrier or clutch support bearing carrier (see paragraph 4-4).
8-87
|
