|
| |
TM 5-2420-222-34
8-18.
REVERSER CLUTCH DRUM AND DISK REPAIR (Con’t).
NOTE
Install first spring washer with concave side against piston. Position second and
third spring washers concave side-to-concave side and position against first
spring washer.
5.
Install piston (9) in clutch drum (6). Position three new spring washers (12) against piston and place retaining ring
(11) on spring washers.
6.
Using modified oil filter cover (10), press down on
spring washers (12) until retaining ring (11) can be
installed to secure piston (9).
7.
Remove modified oil filter cover (10).
TA701415
8-83
|
