|
| |
TM 5-2420-222-34
8-17.
REVERSER BRAKE HOUSING REPAIR (Con’t).
c.
ASSEMBLYI
1.
If removed, install pin (32) and grooved pin (31) in
reverser brake housing (1).
2.
Install new preformed packing (30) in reverser brake
housing (1).
3.
Install seal ring (29) on piston (28).
NOTE
Install first spring washer with concave side
against piston. Position second and third
spring washers concave side-to-concave side
and position against first spring washer.
4.
Install piston (28) in reverser brake housing (1). Position
three new spring washers (27) against piston, and place
retaining ring (26) on top of spring washers.
TA701408
8-76
|
