|
| |
TM 5-2420-222-34
8-16.
REVERSER HOUSING MAINTENANCE (Con’t).
7.
Remove preformed packing (20) from reverser housing (1). Discard preformed packing.
CAUTION
Remove bearing sleeve, clutch and sleeve bushings, expansion plug, and button
plug In steps 8 through 11 only If damaged. Removal may damage parts.
8.
Remove bearing sleeve (25) from reverser housing (1).
9.
Remove clutch bushing (24) and sleeve bushing (22) from reverser housing (1).
10. Remove expansion plug (21) from reverser housing (1).
11. If equipped with button plug (23), remove button plug from reverser housing (1).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-59°C). If
you become dizzy while using cleaning solvent, Immediately get fresh air and
medical help. If solvent contacts eyes, Immediately wash your eyes and get
medical aid.
1.
Clean all metal parts with dry cleaning solvent and rags. Dry thoroughly with clean, dry rags.
TA701400
8-68
|
