|
| |
TM 5-2420-222-34
8-13.
TRANSMISSION TOP COVER MAINTENANCE (SERIAL NUMBERS 319995- 342573) (Con’t).
c.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only In a well-ventilated area. Avoid contact with
skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash point is 100°F-138°F (38°C-59°). If
you become dizzy while using cleaning solvent, Immediately get fresh air and
medical help. If solvent contacts eyes, Immediately wash your eyes and get
medical aid.
1.
Clean all metal parts with dry cleaning solvent. Dry thoroughly with clean, dry rags.
2.
Inspect cover, retaining strap, and tube assembly for cracks, breaks, and abnormal bends. Replace if defective.
3
Inspect cover for damaged threads.
d. REPAIR
Restore damaged cover (8) threads using screw threading set.
e.
ASSEMBLY
1.
Position tube assembly (12) in place on cover (8). Tap tube assembly in cover until seated.
2.
Install grease cap (6) in cover (8).
f.
INSTALLATION
1.
With the aid of an assistant, position cover (8) and new gasket (10) in place on transmission (9).
2.
Install capscrew (13) and sleeve spacer (11) in cover (8) and transmission (9).
3.
Install bolt (4), retaining strap (3), and sleeve spacer (5) on cover (8) and transmission (9).
4.
Install 13 bolts (7) in cover (8) and transmission (9). Torque capscrew (13), bolt (4), and bolts (7) to 35 lb.-ft. (47 N•m).
5.
Install spring (2) on retaining strap (3) and pedal assembly (1).
FOLLOW-ON TASKS:
•
Install transmission liquid level gage rod (see TM5-2420-222-10).
•
Install transmission temperature sending unit (see TM5-2420-222-20).
•
Install rear crossmember (see TM5-2420-222-20).
8-61
|
