|
| |
TM 5-2420-222-34
8-10.
GEAR SHIFTERS AND SHIFTER SHAFTS MAINTENANCE.
This Task Covers:
a.
Removal
c.
Repair
b.
Cleaning and Inspection
d.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Transmission removed (see paragraph 8-2).
•
Rags (Item 28, Appendix B)
•
Transmission top cover removed (see para-
•
Dry cleaning solvent (Item 31, Appendix B)
graph 8-12 or 8-13).
•
Two spring pins
Tools/Test Equipment:
Personnel Required:
Two
•
General mechanic's tool kit
•
Field automotive shop set
General Safety Instructions:
References
•
Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
•
TM 9-214
area.
a.
REMOVAL
1.
Remove pin (9) from shifter fork (10).
2.
Remove four drive screws (8) from four shifter forks (5, 6, 7, and 10).
TA701386
8-47
|
