|
| |
TM 5-2420-222-34
8-5.
TRANSMISSION DRIVE SHAFT MAINTENANCE (Con’t).
2.
Slide shaft collar (1) off drive shaft (10). Bend tabs of three lockplates (3) away from heads of screws (2, 15, and
16.
3.
Remove screws (2, 15, and 16) and lockplates (3) from bearing retainer (4) and transmission (7).
NOTE
Record number and thickness of shims removed to ensure proper spacing during
Installation.
4.
Pry bearing retainer (4) and shims (5) from transmission (7) and bearing cup (6).
5.
Tap drive shaft (10) forward until bearing cup (6) is loose from transmission (7). Remove bearing cup from
driveshaft and assembled parts.
6.
Remove drive shaft (10) with assembled parts from transmission (7), bearing cup (12), and two gears (13 and 14).
7.
Using mechanical gear and bearing puller kit, remove bearing cup (12) from transmission (7).
TA701373
8-26
|
