|
| |
TM 5-2420-222-34
8-3.
TRANSMISSION REAR COVER REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Materials/Parts:
•
General mechanic's tool kit
•
One gasket
•
Three lockwashers (serial numbers 235786-235999)
a.
REMOVAL
NOTE
Perform steps 1 and 2 for loader backhoes with serial numbers 235786-235999.
Perform steps 3 and 4 for loader backhoes with serial numbers 319995-342573.
1.
Remove three capscrews (1) and lockwashers (2) from rear cover (3) and transmission (5). Discard lockwashers.
2.
Pry rear cover (3) and gasket (4) off transmission (5). Discard gasket.
3.
Remove four nuts (10) and lockplates (9) from rear cover (8) and transmission (5).
4.
Remove rear cover (8) and gasket (7) from four studs (6) and transmission (5). Discard gasket.
b.
INSTALLATION
NOTE
Perform steps 1 and 2 for loader backhoes with serial numbers 235786-235999.
Perform steps 3 and 4 for loader backhoes with serial numbers 319995-342573.
1.
Position rear cover (3) and new gasket (4) in place on transmission (5).
2.
Install three capscrews (1) and new lockwashers (2) in rear cover (3) and transmission (5).
3.
Position rear cover (8) and new gasket (7) in place on four studs (6) and transmission (5).
4.
Install four nuts (10) and lockplates (9) on studs (6).
8-18
|
