|
| |
TM 5-2420-222-34
3-19. CONTROL CAMS, GEARS, AND BUSHINGS REPLACEMENT (Con’t).
CAUTION
Do not remove bushings unless damaged.
Removal may damage parts.
6.
Using bearing remover and installer, remove two
bushings (12 and 13) from engine block (1).
NOTE
Perform steps 7 and 8 only if engine
assembly Is Installed and rear bushing is
damaged.
7.
Remove engine assembly (see paragraph 3-3).
8.
Using bearing remover and installer, remove rear
bushing (11) from engine block (1).
3-111
|
