|
| |
TM 5-2420-222-34
3-18.
TIMING GEAR COVER MAINTENANCE (Con’t).
4.
Install ten screws (3) with lockwashers (2), or nine screws (3) with lockwashers (2), and screw (5) with lockwasher
(6) in timing gear cover (11), access cover (13), engine block (1), and cylinder block plate (12).
5.
Install two screws (4) and new lockwashers (7) in timing gear cover (11) and engine block (1). Torque screws to
35 lb.-ft. (47 N•m).
6.
Install six screws (9) and new lockwashers (8) in timing gear cover (11) and engine oil pan (10). Torque screws to
35 lb.-ft. (47•N.m).
7.
Torque ten screws (3) or nine screws (3) and screw (5) to 35 lb.-ft (47 N•m).
TA701292
3-108
|
