|
| |
TM 5-2420-222-34
3-18.
TIMING GEAR COVER MAINTENANCE (Con’t).
a.
REMOVAL
NOTE
Note length and location of screws during removal to ensure proper Installation.
1.
Remove six screws (9) and lockwashers (8) from engine oil pan (10) and timing gear cover (11). Discard
lockwashers.
2.
Remove two screws (4) and lockwashers (7) from timing gear cover (11) and engine block (1). Discard
lockwashers.
NOTE
Timing gear covers with large access covers have one longer screw through
access cover and nine shorter screws securing timing gear cover. Timing gear
covers without large access covers are secured with ten screws of the same
length.
3.
Remove ten screws (3) with lockwashers (2), or nine screws (3) with lockwashers (2), and screw (5) with
lockwasher (6) from timing gear cover (11), cylinder block plate (12), engine block (1), and access cover (13.
Discard lockwashers.
TA701289
3-104
|
