|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE-TO-LOADER BUCKET CYLINDER ROD END OIL LINES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
1.
Oil line (1)
Hose (2)
a.
Place drain pan underneath.
b.
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take out.
c.
Tag (page 2-137).
2.
Loader bucket
Two clamps (5 and 6)
a.
Note relative position for proper
cylinder (3) and
placement during installation.
two oil lines
b.
Using 1/4-inch flat-tip screwdriver,
(1 and 4)
unscrew and take off.
3.
Adapter (7)
Oil line (1)
a.
Place drain pan underneath.
b.
Using 7/8-inch and 1-inch open-end
wrenches, unscrew and take out.
c.
Tag (page 2-137).
4.
Loader bucket
Adapter (7)
a.
Using 1-inch open-end wrench,
cylinder (3)
with assembled
unscrew and take out.
packing (8)
b.
Plug cylinder (1) (page 2-137).
5.
Adapter (7)
Packing (8)
a.
Using pocket knife, take off.
b.
Get rid of.
2-1671
|
