|
| |
TM 5-2420-222-20-3
JAW CONTROL (DIRECT LINEAR) VALVE TUBES AND FITTINGS
This task covers:
a
Removal (page 2-1392)
c
Inspection/Replacement (page 2-1395)
b
Cleaning (page 2-1394)
d
Installation (page 2-1396)
INITIAL SETUP
Tools
Personnel Required
Caps, vise jaw (pair)
One
Knife, pocket
Pan, drain
Equipment Condition
Vise, machinist’s
Wrench, open-end, 7/16-inch
1
Hydraulic system pressure released
Wrench, open-end, 1/2-inch
(page 2-1191)
Wrench, open-end, 518-inch
2
Right platform removed (page 2-1079)
Materials/Parts
NOTE
Rags, wiping (item 21, Appendix C)
The following only applies to loader
Solvent, drycleaning (item 28,
backhoes with Serial Numbers
Appendix C)..
235786 thru 235999.
Tags, marking (item 30, Appendix C)
3
Rear platform removed (page 2-1117)
NOTE
NOTE
The following part only applies
to loader backhoses with Serial
The following only applies to loader
Numbers 235786 thru 235999.
backhoes with Serial Numbers
319995 thru 342573.
Packing, straight adapter
4
Left rear platform removed (page 2-
1114)
2-1391
|
