|
| |
TM 5-2420-222-20-3
HYDRAULIC PUMP PRESSURE LINE TEE-TO-HYDRAULIC ACCUMULATOR OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
20
Loader backhoe
Engine
Start and run at high idle
(TM 5-2420-222-10).
21
Hydraulic pump
a
Check for leaks.
pressure line tee-
b
If leaking at any connection, tighten
to-hydraulic
using 3/4-inch and 7/8-inch open-end
accumulator
wrenches.
oil line
c
If leaking does not stop, shut down
engine (TM 5-2420-222-10) and
replace leaking connection packing,
fitting, or hose as outlined in this
task.
d
If found leaking, repeat steps 19
thru 21.
22
Engine
If still running, shut down
(TM 5-2420-222-10).
TASK ENDS HERE
2-1390
|
