|
| |
TM 5-2420-222-20-3
LOADER CONTROL VALVE HANDLE AND LINKAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
63. Connector link (13),
Two nuts
Using two 3/4-inch open-end wrenches,
turnbuckle (14),
(15 and 16)
loosen.
and bucket control
rod (7)
64. Connector link (13)
Turnbuckle (14)
a.
If handle (11) is tilted to right,
and bucket control
using 3/4-inch open-end wrench, turn
rod (7)
to lengthen assembly.
b.
If handle (11) is tilted to left,
using 3/4-inch open-end wrench, turn
to shorten assembly.
65. Connector link (13),
Two nuts
a.
Using two 3/4-inch open-end
turnbuckle (14),
(15 and 16)
wrenches, tighten until seated against
and bucket control
turnbuckle (14).
rod (7)
b.
Repeat steps 62 thru 65.
2-1335
|
