|
| |
TM 5-2420-222-20-2
SEAT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
94.
Lower seat support
Seat control
With help of assistant, aline openings
(4) and pivot
handle (2)
in parts and place in position.
control lever (1)
If needed, use 3116-inch straight
drive-pin punch to aline spring
pin holes.
95.
Pivot control lever
Spring pin (3)
Using 3/16-inch straight drive-pin punch
(1) and seat control
and 1-pound head ball-peen hammer, tap
handle (2)
into position.
96.
Lower seat support Spring (5)
Using 7/32-inch flat-tip screwdriver,
(4) and pivot
place in position.
control lever (1)
97.
Link (6)
Four outer
If removed, using arbor press and 7/8-inch
bushings (7)
outside diameter remover and installer,
press in place.
98.
Link (6) and
Four inner
Place in position.
four outer
bushings (8)
bushings (7)
99.
Adjustable
Link (6) with
Place in position.
support (9)
assembled parts
100. Adjustable support
Two nuts (10),
Screw together and tighten using 9/16-
(9) and link (6)
washers (11),
inch, 3/8-inch drive socket and ratchet
and screws (12)
handle and 9/16-inch open-end wrench.
101. Seat frame (13)
Latch (14)
Place in position.
102. Seat frame (13) and
Pin (15)
Place in position.
and latch (14)
103. Latch (14) and
Two rings (16)
Using long roundnose pliers, place in
pin (15)
position.
104. Link (6)
Seat frame (13) with
Place in position.
assembled parts
2-1140
|
