|
| |
TM 5-2420-222-20-2
CENTER PLATFORM - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1. Install battery cover (TM 5-2420-222-10).
2. Install right platform (page 2-1079).
3. Install seat (page 2-1120).
TASK ENDS HERE
CENTER PLATFORM SUPPORT
This task covers:
a.
Removal (page 2-1106)
d.
Repair (page 2-1108)
b.
Cleaning (page 2-1107)
e.
Installation (page 2-1108)
c.
Inspection/Replacement (page 2-1108)
INITIAL SETUP
Tools
Personnel Required
Bar, pinch, 36-inch
One
Handle, ratchet, 1/2-inch drive
Socket, 1/2-inch drive, 3/4-inch
Equipment Condition
Threading set, screw
Wrench, open-end, 3/4-inch
1.
Center platform removed (page 2-1099)
2.
Left platform removed (page 2-1060)
Materials/Parts
3.
Left outer platform ramp removed
(page 2-1073)
Lockwasher, support screw nut
4.
Right inner platform ramp removed
(four required)
(page 2-1095)
Rags, wiping (item 21, Appendix C)
Solvent, drycleaning
(item 28, Appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Loader backhoes with Serial Numbers 235786 thru 235999 have canopy. Loader backhoes with Serial
Numbers 319995 thru 342573 have rollover protective structure.
2-1106
|
