|
| |
TM 5-2420-222-20-2
STABILIZERS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
30.
Stabilizer (2) and
Cylinder rod end
a.
With help of assistant, aline pin holes
cylinder rod end (3)
pin (7)
in stabilizer (2) and rod end (3).
b.
Using 3-pound head cross-peen
hammer and 3/4-inch brass tipped
driftpin, tap into position.
Make sure to aline holes in pin
and stabilizer.
31.
Stabilizer (2) and
New locknut (8) and
Screw together and tighten using 3/4-
cylinder rod end
screw (9)
inch open end wrench, 3/4-inch, 1/2-inch
pin (7)
drive socket and ratchet handle.
TA243236
2-1057
|
