|
| |
TM 5-2420-222-20-2
COWL FRONT COVER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
WARNING
Water soluble cleaning compound solvent is flammable and fumes are toxic.
Flashpoint is 220°F (104°C). Boiling point is 212°F (100°C). Do not store in
temperatures above 150°F (65°C) or below 35°F (2°C). Do not use near open flame
or excessive heat. Do not wear jewelry, wear rubber gloves and goggles, and use
only in well ventilated area. Avoid contact with skin, eyes, and clothes, and don't
breathe vapors. Avoid contact with acids, aluminum, or zinc; chemical reaction
may result. If you become dizzy while using cleaning compound solvent, get
fresh air immediately and get medical aid. If contact with eyes is made, wash your
eyes with water and get medical aid immediately.
3.
Cowl front
cowl barrier (2)
d.
Wet with more cleaning compound
cover (1) -
solvent and continue to pull off.
Continued
e.
Repeat steps b thru d above until
completely removed.
f.
Using clean rag dampened with clean-
ing compound solvent, remove all
adhesive from cover (1).
g.
Rinse cover (1) and barrier (2) with
clean water.
h.
Using clean, dry rags, wipe dry.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-137).
4.
Cowl front cover
a.
Using clean rags dampened with solution
(1) and assembled
of detergent and water, wipe clean.
barrier (2), if
b.
Rinse with clean water.
present
c.
Using clean, dry rags, wipe dry.
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and
clothes and don't breathe vapors. Do not use near open flame or excessive heat.
The flashpoint is 100°F to 138°F (38° to 59°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with
eyes is made, wash your eyes with water and get medical aid immediately.
2-1022
|
