|
| |
TM 5-2420-222-20-2
COWL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
NOTE
Steps 47 and 48 only apply to loader backhoes with Serial Numbers 319995 thru
342573.
47.
Cowl (1)
Bezel (2) with
Place in position.
assembled parts
48.
Cowl (1) and
Base (3)
Screw on and tighten.
bezel (2)
49.
Cowl (1)
Horn switch (4)
Place in position.
50.
Cowl (1) and horn
Horn switch
Screw on and tighten using slip-joint
switch (4)
caps (5)
pliers.
51.
Cowl (1)
Time total
Place in position.
meter (6)
52.
Cowl (1) and time
Three nuts (7),
Screw together and tighten using 5/16-
total meter (6)
new lockwashers (8),
inch open-end wrench and 3/16-inch flat-
washers (9), and
tip screwdriver.
screws (10)
INSTALLATION
53.
Steering column
Cowl (1) with
Place in position.
(11) and cowl
assembled parts
support (12)
54.
Cowl (1)
Two hood
Place in position.
retainers (13)
55.
Two hood retainers
Four nuts (14), new
a.
Screw together part way.
(13), cowl (1),
lockwashers (15),
b.
Using 9/16-inch open-end wrench and
and cowl
washers (16), and
9/16-inch, 1/2-inch drive socket and
support (12)
screws (17)
ratchet handle, tighten.
56.
Cowl (1) and
Grommet (18)
Place in position.
steering column (11)
57.
Light switch
Connector (20)
a.
Take off tag.
terminal (19)
b.
Push on.
2-1016
|
