|
| |
TM 5-2420-222-20-2
COWL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-137).
Replace defective parts as needed.
36.
Cowl (1)
Look for cracks, breaks, and abnormal
bends.
37.
All decals,
Look for cracks, tears, and readability.
instruction labels,
identification and
name plates
38.
All attaching
look for damaged threads.
hardware
39.
Upper bumper (2)
Look for cracks, tears, and crumbling.
and cowl bumper (3)
ASSEMBLY
40.
Cowl (1)
Decals and
If removed, install (page 2-1186).
instruction labels
41.
Identification
If removed, install (page 2-1182).
and name plates
42.
Upper bumper (2) a.
If removed, apply metal adhesive in
and cowl bumper (3)
0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads, in 2.00-inch (50.8 mm) or
smaller squares.
Make sure that outside bead is within
0.25-inch (6.35 mm) of edge with no
gaps.
b.
Line up and press into place to transfer
some metal adhesive.
c.
Take off and allow metal adhesive to set
for two minutes.
d.
Line up and press firmly into place.
2-1014
|
