|
| |
TM 5-2420-222-20-2
COWL
This task covers:
a.
Removal (page 2-1006)
d.
Inspection/Replacement (page 2-1014)
b. Disassembly (page 2-1010)
e.
Assembly (page 2-1014)
c.
Cleaning (page 2-1013)
f.
Installation (page 2-1016)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 1/2-inch drive
Lockwasher, lever screw
Knife, putty
Lockwasher, light switch nut
Pliers, slip-joint
Pin, cotter control shaft
Screwdriver, flat-tip, 3/16-inch
Rags, wiping (item 21, Appendix C)
Socket, 1/2-inch drive, 9/16-inch
Solvent, cleaning compound (item 27,
Wrench, open-end, 11/32-inch
Appendix C)
Wrench, open-end, 5/16-inch
Solvent, drycleaning (item 28, Appendix C)
Wrench, open-end, 9/16-inch
Tags, marking (item 30, Appendix C)
Wrench, open-end, 5/8-inch
Personnel Required
Materials/Parts
One
Adhesive, metal bonding (item 1,
Appendix C)
Equipment Condition
Detergent, GP (item 7, Appendix C)
Lockwasher, cigar lighter
1.
Dash removed (page 2-579)
terminal nut
2.
Steering wheel removed (page 2-941)
Lockwasher, cowl screw nut
3.
Left outer platform ramp removed
(four required)
(page 2-1073)
Lockwasher, time total meter screw
(three required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Time total meter
Connector (2)
a.
Pull off.
terminal (1)
b.
Tag (page 2-137).
2.
Time total meter
Connector (4)
a.
Pull off.
terminal (3)
b.
Tag (page 2-137).
3.
Two horn switch
Connector (6)
a.
Pull off.
terminals (5)
b.
Tag (page 2-137).
2-1006
|
