|
| |
TM 5-2420-222-20-2
STEERING VALVE-TO-TRANSMISSION RETURN OIL LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
16. Elbow (1)
New packing (2)
Place in position.
17.
Nut (3)
Screw on all the way.
18. Steering valve (4)
Elbow (1) with
a. Unplug steering valve (4).
assembled parts
b. Screw in and tighten to position noted
during removal using 5/8-inch open-
end wrench.
19. Steering valve (4)
Nut (3)
Using 5/8-inch and 7/8-inch open-end
and elbow (1)
wrenches, tighten until seated against
steering valve (4).
20. Elbow (1)
Line (5)
a. Take off tag.
b. Screw on and tighten using 5/8-inch
and 11/16-inch open-end wrenches.
21. Transmission
Reducer bushing (7)
a. Unplug transmission case (6).
case (6)
b. Screw in and tighten using 1 11/8-
inch combination box and open-end
wrench.
22. Reducer bushing (7)
Elbow (8)
Screw in and tighten to position noted
during assembly using 5/8-inch open-end
wrench.
23. Elbow (8)
Line (5)
Screw on and tighten using 11/16-inch
open-end wrench.
24. Line (5)
Clamp (9)
a. Place in position.
b. Using multiple tongue and groove slip-
joint pliers, bend ends together.
25. Clutch pedal (10)
Helical spring (12)
a. Have assistant pull clutch pedal (10)
and strap (11)
back as far as possible.
b. Using multiple tongue and groove slip-
joint pliers, place in position with
long hook on clutch pedal (10).
26. Clutch pedal (10),
Stop (14)
a. Have assistant push down clutch
speed gear assembly
pedal (10) and hold.
(13), and clamp (9)
b. Place in position.
2-990
|
