|
| |
TM 5-2420-222-20-2
STEERING VALVE OIL LINE-TO-STEERING CYLINDER OIL HOSES (SERIAL NUMBERS 319995
THRU 342573 ONLY) - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-137).
Replace defective parts as needed.
8.
Hose (1)
Look for cuts, cracks, and breaks.
9.
Hose elbow (2)
Look for cracks and breaks.
10.
All threaded parts
Look for damaged threads.
INSTALLATION
11.
Hose elbow (2)
Nut (3)
Screw on all the way.
12.
New packing (4)
Place in position.
13.
Cylinder (5)
Hose elbow (2)
a.
Uncap cylinder (5).
with assembled parts
b.
Screw in and tighten to same relative
position noted during removal using
5/8-inch open-end wrench.
14.
Cylinder (5) and
Nut (3)
Using 5/8-inch and 11/16-inch open-end
hose elbow (2)
wrenches, tighten until seated against
cylinder (5).
15.
Hose elbow (2)
Hose (1)
a.
Take off tag.
b.
Screw on and tighten using 11/16-inch
open-end wrench.
16.
Line (6)
Hose (1)
a.
Uncap line (6).
b.
Screw in and tighten using 5/8-inch
and 11/16-inch open-end wrenches.
17.
Loader backhoe
Transmission
Check fluid level and add proper amount
and grade (TM 5-2420-222-10).
18.
Engine
Start and run at high idle
(TM 5-2420-222-10).
2-966
|
