|
| |
TM 5-2420-222-20-2
REAR TIRE AND WHEEL ASSEMBLIES
This task covers:
a.
Removal (page 2-905)
d.
Repair (page 2-908)
b.
Cleaning (page 2-908)
e.
Installation (page 2-909)
c.
Inspection/Replacement (page 2-908)
INITIAL SETUP:
Tools
Tools - Continued
Bar, pinch, 26-inch
NOTE
Blocks, wood
Jack, dolly type, hydraulic, 10-ton
The following tools only apply
capacity
to loader backhoes with Serial
Trestle, motor vehicle, 5-ton capacity
Numbers 319995 thru 342573.
Truck, lift, wheel, 2400-pound capacity
Bar, torque wrench
NOTE
Extension, 3/4-inch drive, 8-inch
Handle, ratchet, 3/4-inch drive
The following tools only apply
Multiplier, torque wrench, 3/4-inch drive,
to loader backhoes with Serial
1200 foot-pound capacity
Number 235786 thru 235999.
Socket, 3/4-inch drive,1 11/8-inch
Extension, 1/2-inch drive, 10-inch
Materials/Parts
Handle, ratchet, 1/2-inch drive
Handle, hinged, 1/2-inch drive
Rags, wiping (item 21, Appendix C)
Wrench, torque, 1/2-inch drive,
Solvent, drycleaning (item 28, Appendix C)
0 to 175 foot-pound capacity
Personnel Required
Two
ACTION
LOCATION
ITEM
REMARKS
NOTE
Loader backhoe has two rear tire and wheel assemblies. Both are maintained the
same way. Right rear tire and wheel assembly is shown. Repeat procedures for
left side as needed.
2-904
|
