|
| |
TM 5-2420-222-20-2
STARTER NEUTRAL SAFETY SWITCH
This task covers:
a.
Removal (page 2-472)
d.
Repair (page 2-474)
b.
Cleaning (page 2-472)
e.
Installation (page 2-474)
c.
Inspection/Replacement (page 2-473)
INITIAL SETUP
Tools
Materials/Parts - Continued
File, thread restorer
Solvent, drycleaning (item 28, Appendix C)
Handle, ratchet, 1/2-inch drive
Tags, marking (item 30, Appendix C)
Multimeter
Socket, deep, 12-point, 1/2-inch
Personnel Required
drive, 7/8-inch
Wrench, torque, 112-inch drive
One
0 to 150 foot-pound capacity
Equipment Condition
Materials/Parts
Battery ground cable disconnected
Cleaning compound, solvent
(page 2-696)
(item 4, Appendix C)
Rags, wiping (item 21, Appendix C)
Shim aluminum (as required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Two terminals (1)
Connector (2)
a.
Tag (page 2-137).
b.
Unplug.
NOTE
Number of aluminum shims may vary.
2.
Transmission top
Neutral safety
Using 7/8-inch, 1/2-inch drive 12-point
cover (3)
switch (4) and
deep socket and ratchet handle, unscrew
aluminum shim or
and take out.
shims (5)
2-471
|
